PRO

XTRA

OUTDOOR

 PMIT

DranTech XTRA

Same as PRO with has an extanded bandwidth and 540KB memory for datalogging.

CAT III 1000V, CAT IV 600V

For more Features CLICK HERE

DranTech PL10

Voltage disturbance recorder, data logger and power meter

CAT III 600V

For more Features CLICK HERE

DranTech ULTRA

High precision multimeter (0.004% and 1.2M counts)

Milli-Ohmeter and data logger

CAT III 600V

For more Features CLICK HERE

DranTech OUTDOOR

All DMM measurements. Meets IP-65 (NEMA 4) water and dust resistance

CAT III 1000V, CAT IV 600V

For more Features CLICK HERE

DranTech PMIT

Milli-Ohm resistance meter, DMM, data logger and Insulation tester.

CAT II 600V

For more Features CLICK HERE

DranTech ISO  Insulation Tester

 5000 Ohms to 3.1 GigaOhms

TRMS Multimeter abd data logger

CAT II 600V, CAT III 600V

For more Features CLICK HERE

The Extech 2000A True RMS
Three-Phase Clamp-On Power Quality Analyzer

measures, computes, and displays three-phase power on balanced or unbalanced loads. It displays lead/lag current/voltage phase shift in degrees,stores/recalls the last 5 readings, duals displays of kW+PF, kVA+kVAR, phase-angle+Hz, Volts+Hz, or Amps+Hz

The Extech 3000A Appliance Tester/Power Analyzer Datalogger is a compact battery operated instrument for analyzing AC/DC power loads — with PC interface plus datalogging. It displays Watts, Power Factor or VA, Voltage or Hz and Current. It measures True RMS Voltage & Current with a crest factor up to 5. The appliance to be tested is plug in directly to the Power Analyzer.

The CA-2000 Hand-Held Portable Power Quality Analyzer is designed for use by field personnel assigned to maintain and check the power quality of installed electric power systems. It records data of electric parameters in an internal non-volatile memory at regular intervals that can be pre-programmed by the user.  It is packaged in a rugged enclosure for use in industrial environments. It can be used with traditional current clamps or with air-core flexible current sensors.

CA-2000 Power Analyzer kits are available with a large selection of current clamps or flexible current sensors that measure currents from 20 Milliamperes to 20,000 Amperes. The kits also includes color-coded cables, and voltage clips in a soft carrying case.